TECH OFFER

Quorum Quenching for Fouling Control in Membrane Bioreactors

KEY INFORMATION

TECHNOLOGY CATEGORY:
Environment, Clean Air & Water - Filter Membrane & Absorption Material
TECHNOLOGY READINESS LEVEL (TRL):
LOCATION:
Singapore
ID NUMBER:
TO174532

TECHNOLOGY OVERVIEW

Membrane bioreactors (MBR) have been widely used in full-scale plants for wastewater treatment and water reclamation due to its highly compact design and treatment efficiency, low sludge production, and excellent effluent quality. However, membrane fouling remains as a bottleneck for MBR operation as it severely reduces the flux and increases operating and maintenance costs, which accounts for around 60% of the overall operational cost. This technology utilises Alginate-Powder Activated Carbon - Quorum Quenching (APQ) beads to significantly slow down the membrane biofouling rate. This prolongs the membrane lifetime and reduces operational cost.

This technology offer provides a technology package, including production, storage, reactivation, recovery, and reuse methods of APQ beads. MBR technology providers can benefit from this technology to improve the competitiveness of their MBR product and end users can save on overall operational cost.

TECHNOLOGY FEATURES & SPECIFICATIONS

This technology is developed based on embedding the quorum quenching bacteria into APQ beads to control the cell-cell communication signal, thereby retarding biofilm development on membrane.

Some features of the technology are as follows:

  1. The APQ beads can effectively control membrane fouling and improve sludge property
  2. APQ beads can be stored for more than 12 months without activity loss
  3. APQ beads can be directly applied to the existing MBR
  4. MBR fouling rate can be reduced by 5 times
  5. Used beads can be re-activated and reproduced

POTENTIAL APPLICATIONS

The technology can be utilized for installed MBRs for treating diverse types of wastewater and waste streams.

Unique Value Proposition

MBR technology suppliers can upgrade their product with APQ beads to increase products competitiveness in resisting membrane fouling. Water reclamation plants can reduce operation cost and chemical cost by using APQ beads assisted MBR to slow-down membrane fouling, reduce the chemical consumption and the cost for changing damaged membrane module due to frequent chemical cleaning.

RELATED TECH OFFERS
Adsorbent for Low Concentration & Room Temperature Adsorption of Carbon Dioxide
Ultra-permeable Biomimetic Membrane for Desalination
Membrane System for High Recovery Water Reclamation
Integrated Water Recycling and Repurposing System
Modular and Scalable Disinfecting Filtration System for Improved Indoor Air Quality
Purifying Indoor Air Pollution Without Electrical Power
Carbon Capture from Dilute Flue Gases Using Aqueous Ammonia
Enabling Carbon Capture via Hydrogen Separation Membrane
Nature-Inspired Superhydrophobic Membranes For Membrane Distillation
Membrane Separation for Protein Concentration